ÈÈÔþ¸Ö°åHot Rolled Steel Plate
ÀäÔþ¾í°åPrime Cold Rolled Steel Sheet in Coil
ÈÈÔþ¾í°åPrime Hot Rolled Steel Coil
°å²ÄPlate products
Ð͸ÖProfile products
ÌظÖSpecial steel products
¸Ö´øSteel strip product
½¨²ÄBuilding materials product
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main products
ÓÊÏ䣺
µç»°£º
kuÓÎ×îеØÖ·:Ò»°ã½á¹¹Óøְå
Steel Plates for General Structure
Ö÷ÒªÓÃ;
Steel plates for general structure? are widely used in engineering structures such as steel structure buildings, construction machinery, heavy duty cars, bridges, wind power£¬ pressure vessels and so on.
Åƺźͱê×¼
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:¹ø¯ºÍѹÁ¦ÈÝÆ÷Óøְå
Steel Plates for Boilers and Pressure Vessels
Ö÷ÒªÓÃ;
They are mainly used to manufacture boilers and pressure vessels. The steel plates for pressure vessels can be fabricated into device that will sustain certain pressure, temperature and medium, so they are required to possess high strength, good toughness, weldability and surface quality. Many kinds and sizes of the products are required to deliver in heat treatment condition and satisfy ultrasonic test requirements. These steels are widely used in various sectors in national economy, such as reactor, heat exchanger, separator, spherical tank, oil tank, LPG tank ,boiler steam drum and pressure pipes in machinery, petroleum and chemicals, electric power and metallurgy industries, etc.
Åƺźͱê×¼
|
Ãû³Æ |
ÅƺÅ? Grade |
±ê×¼ºÅ |
|
¹ø¯ºÍѹÁ¦ÈÝÆ÷Óøְå |
Q245R¡¢Q 345R¡¢Q370R¡¢Q420R |
GB/T 713 |
|
18MnMoNbR¡¢13MnNiMoR¡¢15CrMoR¡¢12Cr2Mo1R¡¢14Cr1MoR¡¢12Cr1MoVR |
||
|
µÍÎÂѹÁ¦ÈÝÆ÷Óøְå |
16MnDR¡¢15MnNiDR¡¢15MnNiNbDR¡¢09MnNiDR |
GB/T 3531 |
|
08Ni3DR¡¢06Ni9DR |
||
|
¸ßÇ¿¶È¹ÞÌå¼°Ë®µçѹÁ¦¸Ö¹ÜÓøְå |
A537/SA537 CL2/CL3 |
ÃÀ±ê |
|
07MnMoVR¡¢07MnNiVDR¡¢07MnNiMoDR¡¢12MnNiVR |
GB/T 19189 |
|
|
¿¹HIC/SSCCÈÝÆ÷¸Ö°å |
Q245R(R-HIC)¡¢Q345R(R-HIC)¡¢(S)A516Gr60/65/70(R-HIC) |
񻂗 |
|
¸ß¯¯¿Ç°å |
LK490C |
|
|
ÆäËû¹úÍâ±ê×¼ |
A515/SA515¡¢A516/SA516¡¢A537/SA537ÒÔ¼°A517/SA517ϵÁÐµÈ |
ÃÀ±ê |
|
P355GH¡¢16Mo3¡¢13CrMo4-5 |
Å·±ê |
|
|
SPV355¡¢SPV490 µÈ |
ÈÕ±ê |
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺µç»°£º
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺µç»°£º
kuÓÎ×îеØÖ·:¸ßÇ¿¶È½á¹¹Óøְå
High strength steel plates for structure
Ö÷ÒªÓÃ;
High strength steel plates for structure have high strength, good low temperature toughness in addition to the excellent welding performance. They are mainly used for the fabrication of the high strength welding structure of construction machinery, coal mining equipment£¨hydraulic support, scraper conveyer£©,boom, outrigger, frame , bulldozer, dump truck, drilling platform ,drilling rig and steel structure and so on. According to purpose£¬there are 60-80kg high strength steel plates£¬60-90kg low welding crack sensitive steel plates, quench and temper ultra-high strength steel plates etc.
Åƺźͱê×¼
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:¸ßÇ¿¶È½á¹¹Óøְå
High strength steel plates for structure
Ö÷ÒªÓÃ;
¸ßÇ¿¶È½á¹¹Óøְ壬¾ßÓиߵÄÇ¿¶ÈºÍÁ¼ºÃµÍÎÂÈÍÐÔ£¬º¸½ÓÐÔÄÜÓÅÁ¼¡£Ö÷ÒªÓÃÓÚÖÆ×÷¸ßÇ¿¶È¹¤³Ì»úеº¸½Ó½á¹¹¡¢ÃºÌ¿¿ª²ÉÉ豸£¨ÒºÑ¹Ö§¼Ü¡¢¹Î°åÔËÊä»ú£©¡¢ÆðÖØ»úµõ±ÛÖ§ÍÈ¡¢³µ¼Ü¡¢ÍÆÍÁ»ú¡¢×Ôж³µ¡¢×꾮ƽ̨¡¢×ê»ú¡¢¸Ö½á¹¹µÈ¡£¸ù¾ÝÓÃ;¿É·ÖΪ60-80kg¼¶¸ßÇ¿¶È½á¹¹¸Ö°å¡¢60-90kg¼¶µÍº¸½ÓÁÑÎÆÃô¸ÐÐÔ¸ßÇ¿¶È¸Ö°å¡¢´ã»ð»Ø»ð³¬¸ßÇ¿¶È¸Ö°åµÈϵÁвúÆ·¡£
High strength steel plates for structure have high strength, good low temperature toughness in addition to the excellent welding performance. They are mainly used for the fabrication of the high strength welding structure of construction machinery, coal mining equipment£¨hydraulic support, scraper conveyer£©,boom, outrigger, frame , bulldozer, dump truck, drilling platform ,drilling rig and steel structure and so on. According to purpose£¬there are 60-80kg high strength steel plates£¬60-90kg low welding crack sensitive steel plates, quench and temper ultra-high strength steel plates etc.
Åƺźͱê×¼
60-80kg¼¶¸ßÇ¿¶È½á¹¹¸Ö°å£¨60-80kg high strength steel plates £©
Q460C/D/E/F
GB/T16270-2009
GB/T 1591-2008
Q550C/D/E/F GB/T16270-2009
GB/T 1591-2008
Q690C/D/E/F GB/T16270-2009
GB/T 1591-2008
S460Q/QL/QL1
S500 Q/QL/QL1 EN10025-6£º2004
S550Q/QL/QL1
S620 Q/QL/QL1 EN10025-6£º2004
S690Q/QL/QL1 EN10025-6£º2004
A514 Grade S ASTM A 514
60-90kg¼¶µÍº¸½ÓÁÑÎÆÃô¸ÐÐÔ¸ßÇ¿¶È¸Ö°å£¨60-90kg low welding crack sensitive steel plates Q460CFC/D/E YB/T4137-2005£©
Q500CFC/D/E YB/T4137-2005
Q550CFC/D/E YB/T4137-2005
Q620CFC/D/E YB/T4137-2005
Q690CFC/D/E YB/T4137-2005
Q800CFC/D/E YB/T4137-2005
´ã»ð»Ø»ð³¬¸ßÇ¿¶È¸Ö°å
quench and temper ultra-high strength steel plates Q800C/D/E GB/T16270-2009
Q890C/D/E GB/T16270-2009
Q960C/D/E GB/T16270-2009
S890Q/QL/QL1 EN10025-6£º2004
S960Q/QL/QL1 EN10025-6£º2004
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:¹ø¯ºÍѹÁ¦ÈÝÆ÷Óøְå
Steel Plates for Boilers and Pressure Vessels
Ö÷ÒªÓÃ;
They are mainly used to manufacture boilers and pressure vessels. The steel plates for pressure vessels can be fabricated into device that will sustain certain pressure, temperature and medium, so they are required to possess high strength, good toughness, weldability and surface quality. Many kinds and sizes of the products are required to deliver in heat treatment condition and satisfy ultrasonic test requirements. These steels are widely used in various sectors in national economy, such as reactor, heat exchanger, separator, spherical tank, oil tank, LPG tank ,boiler steam drum and pressure pipes in machinery, petroleum and chemicals, electric power and metallurgy industries, etc.
Åƺźͱê×¼
|
Ãû³Æ |
ÅƺÅ? Grade |
±ê×¼ºÅ |
|
¹ø¯ºÍѹÁ¦ÈÝÆ÷Óøְå |
Q245R¡¢Q 345R¡¢Q370R¡¢Q420R |
GB/T 713 |
|
18MnMoNbR¡¢13MnNiMoR¡¢15CrMoR¡¢12Cr2Mo1R¡¢14Cr1MoR¡¢12Cr1MoVR |
||
|
µÍÎÂѹÁ¦ÈÝÆ÷Óøְå |
16MnDR¡¢15MnNiDR¡¢15MnNiNbDR¡¢09MnNiDR |
GB/T 3531 |
|
08Ni3DR¡¢06Ni9DR |
||
|
¸ßÇ¿¶È¹ÞÌå¼°Ë®µçѹÁ¦¸Ö¹ÜÓøְå |
A537/SA537 CL2/CL3 |
ÃÀ±ê |
|
07MnMoVR¡¢07MnNiVDR¡¢07MnNiMoDR¡¢12MnNiVR |
GB/T 19189 |
|
|
¿¹HIC/SSCCÈÝÆ÷¸Ö°å |
Q245R(R-HIC)¡¢Q345R(R-HIC)¡¢(S)A516Gr60/65/70(R-HIC) |
񻂗 |
|
¸ß¯¯¿Ç°å |
LK490C |
|
|
ÆäËû¹úÍâ±ê×¼ |
A515/SA515¡¢A516/SA516¡¢A537/SA537ÒÔ¼°A517/SA517ϵÁÐµÈ |
ÃÀ±ê |
|
P355GH¡¢16Mo3¡¢13CrMo4-5 |
Å·±ê |
|
|
SPV355¡¢SPV490 µÈ |
ÈÕ±ê |
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:½á¹¹ÓÃÈÈÔþ¸Ö°åºÍ¸Ö´ø
Hot-rolled Steel Sheets and Strips for Structures
Ö÷ÒªÓÃ;
½á¹¹ÓøÖÒ»°ã¾ßÓнϸߵÄÇ¿¶ÈÓë½ÏºÃµÄ³ÉÐÍÐÔÄÜ£¬Í¨³£¾¹ý¼òµ¥µÄ¼Ó¹¤ºó³ÐÊÜÍⲿµÄÔغɡ£ÊÊÓÃÓÚº¸½Ó¡¢Ã½Ó¡¢½Â½ÓµÈÒ»°ã½á¹¹¼þÓ᣸ÃϵÁвúÆ·¾ßÓÐÐÔÄÜ¿É¿¿£¬³ÉÐÍÐÔÄܺ㬺¸½ÓÐÔÄÜÓŵÄÌص㣬²úÆ·Äܹ»Ó¦ÓÃÓÚ½¨Öþ½á¹¹¡¢ÇÅÁº¡¢´¬²°¡¢Ìú·³µÁ¾¡¢¹ÜµÀ´óÐÍ»úе¼°ÆäËû½á¹¹¼þµÈ¸÷¸öÐÐÒµ¡£Ö÷Òª°´ÕÕ¹ú±ê½øÐй©»õ£¬Ò²¿É²ÎÕÕÈÕ±êºÍÅ·±ê½øÐй©»õ¡£
The structural steel generally has high strength and good formability, is
used to bear external load after simple fabrication and applicable to ordinary
structural members subject to welding, riveting and hinging.
This series of products are characterized by reliable performance, good
formability and excellent weldability, and can be used in various sectors like
building structures, bridges, ships, railway vehicles,
pipelines, large machineries and other structural members. The supply of those
products are mainly in accordance with Chinese national standards, and the
Japanese and European standards
may be taken as references as well.
Åƺźͱê×¼
¸ÃϵÁвúÆ·¿É¹©ÅƺÅÈçϱíËùʾ£¬³¬³ö¹æ¸ñ·¶Î§¿ÉÓëÎÒÃÇÁªÏµ¡£
The available designations of this series of products are shown below, and please contact us if any required product is out of the range.
¹ú±êÓëÈÕ±êÅƺŶÔÓ¦±í
Cross Reference of the Steel Designations as per Chinese and Japanese Standards
|
±ê×¼ |
GB 912/GB3274/GB710/GB711 |
JIS G3101 |
|
ÅƺŠ|
Q195, Q215A |
SS330 |
|
Q235A, Q255A |
SS400 |
|
|
Q275A |
SS490 |
?
¹ú±êÓëµÂ±ê¡¢Å·±êÅƺŶÔÓ¦±í
Cross Reference of Steel Designations as per Chinese, German and European Standards
|
±ê×¼ Standard |
GB 912/GB 3274 |
EN10025-2 |
DIN 17100 |
|
ÅƺŠDesignation |
Q195¡¢Q215B |
S185 |
St33 |
|
Q235B |
S235JR |
St37-2£¬RSt37-2 |
|
|
Q235C |
S235J0 |
St37-3 |
|
|
Q235D |
S235J2 |
- |
|
|
Q275B |
S275JR |
St44-2 |
|
|
Q275C |
S275J0 |
St44-3 |
|
|
Q275D |
S275J2 |
- |
|
|
Q345A |
E295 |
St50-2 |
|
|
Q345B |
S355JR |
- |
|
|
Q345C |
S355J0 |
St52-3 |
|
|
Q345D |
S355J2 |
- |
|
|
Q345E |
S355K2 |
- |
?
²úÆ·¹æ¸ñ
1.3-25.4*830-1900mm
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺250101µç»°£º0531-67606362
kuÓÎ×îеØÖ·:ºËµçÓøְå SA738Gr.B
Steel plate for nuclear power SA738Gr.B
Ö÷ÒªÓÃ;
¾ßÓнϸߵÄÇ¿¶È¡¢Á¼ºÃµÄËÜÈÍÐԺͺ¸½ÓÐÔÄÜ£¬ÓÃÓÚÖÆÔìºË·´Ó¦¶Ñ³§·¿¸ÖÖÊ°²È«¿Ç¡£
With high strength, good plasticity, toughness and weldability, suitable for manufacture of the steel containment vessel for the nuclear reactor plant.
Åƺźͱê×¼
²úÆ·Åƺţº SA738Gr.B
Product grade: SA738GR.B
Ö´Ðбê×¼£º ASME SA-738/SA-738M-2010
Applicable standard: ASME SA-738/SA-738M-2010
²úÆ·¹æ¸ñ
4¡«120¡Á1500¡«4100¡ÁLmm
kuÓÎ×îеØÖ·:ºËµçÓøְå P235/265/295/355GH
Steel plate for nuclear power P235/265/295/355GH
Ö÷ÒªÓÃ;
¾ßÓÐÁ¼ºÃµÄËÜÐÔ¡¢ÈÍÐÔ¡¢ÀäÍäÐÔÄܺͺ¸½ÓÐÔÄÜ¡£ÊÊÓÃÓÚÖÆÔìºËµº¸ÖÖÊ°²È«¿Ç¡¢Ñ¹Á¦ÈÝÆ÷¡¢É豸¹¹¼þµÈ¡£
With good plasticity, toughness, cold bending property and welding performance. Suitable for manufacture of the steel containment vessel for the nuclear island, pressure vessel, equipment components and so on.
Åƺźͱê×¼
²úÆ·Åƺţº P235GH¡¢ P265GH¡¢ P295GH¡¢ P355GH
Product grade: P235GH, P265GH, P295GH, P355GH?
Ö´Ðбê×¼£º EN10028-2
?Applicable standard: EN10028-2
²úÆ·¹æ¸ñ
4¡«90¡Á1500¡«4100¡ÁLmm
kuÓÎ×îеØÖ·:ºËµçÓøְå SA516GR55¡¢ SA516GR60¡¢ SA516GR65¡¢ SA516GR70
Steel plate for nuclear power SA516GR55, SA516GR60
Ö÷ÒªÓÃ;
¾ßÓнϸßÇ¿¶È¡¢Á¼ºÃËÜÈÍÐԺͺ¸½ÓÐÔÄÜ£¬ÓÃÓÚÖÆÔìºËµçÓÃѹÁ¦ÈÝÆ÷É豸¡£
With high strength, good plasticity, toughness, and welding performance, suitable for manufacture of the pressure vessel and equipment components for nuclear power plant.
Åƺźͱê×¼
²úÆ·Åƺţº SA516GR55¡¢ SA516GR60¡¢ SA516GR65¡¢ SA516GR70
Product grade: SA516GR55, SA516GR60, SA516GR65, SA516GR70
Ö´Ðбê×¼£º ASME SA-516/SA-516M-2010
Applicable standard: ASME SA-516/SA-516M-2010
²úÆ·¹æ¸ñ
6~120¡Á1500~4100¡ÁLmm
kuÓÎ×îеØÖ·:ºËµçÓøְå SA517
Steel plate for nuclear power SA517
Ö÷ÒªÓÃ;
¾ßÓиßÇ¿¶È¡¢Á¼ºÃµÄËÜÈÍÐԺͺ¸½ÓÐÔÄÜ£¬ÓÃÓں˵çÕ¾»úеģ¿éÖ§³Å¼þ¡£
With high strength, good plasticity, toughness and weldability, suitable for manufacture of the mechanical module support for nuclear power plants.
Åƺźͱê×¼
²úÆ·Åƺţº SA517Gr.B¡¢ SA517Gr.F
Product grade: SA517GR.B, SA517GR.F
Ö´Ðбê×¼£º ASME SA-517/SA-517M-2010
Applicable standard: ASME SA-517/SA-517M-2010
²úÆ·¹æ¸ñ
4¡«120¡Á1500¡«4100¡ÁLmm
kuÓÎ×îеØÖ·:60-90kg ¼¶µÍº¸½ÓÁÑÎÆÃô¸ÐÐÔ¸ßÇ¿¶È¸Ö°å
60-90kg grade low welding crack susceptibility hig
Ö÷ÒªÓÃ;
±¾²úƷϵÇü·þÇ¿¶È 460¡¢ 500¡¢ 550¡¢ 620¡¢ 690¡¢ 800MPa µÄµÍº¸½ÓÁÑÎÆÃô¸ÐÐÔ¸Ö£¬¾ßÓÐÊ¡ÂÔº¸Ç°Ô¤ÈÈ¡¢º¸ºóÎÞÐèÈÈ´¦ÀíµÄÓÅ Á¼µÄº¸½ÓÐÔÄÜ£¬¿ÉÓÃÓÚ¸÷ÖÖú¿ó»úе¡¢¹¤³Ì»úе¡¢¸Û¿Ú»úе¡¢½¨Öþ»úе¼°ÆäËüÒªÇóÁ¼ºÃº¸½ÓÐԵĽṹ²¿¼þµÈ¡£
This product is the ? low welding crack susceptibility steel plate with the yield strengths of 460, 500, 550, 620, 690 and
800MPa, showing excellent welding performance due to no need of preheating before welding or heat treatment after welding, suitable for manufacture of various mining machinery, engineering machinery, port machinery, construction machinery and other structural components of good welding requirements.
Åƺźͱê×¼
|
?Q460CFC/D/E Q500CFC/D/E Q550CFC/D/E Q620CFC/D/E |
? ??±ê×¼£º YB/T4137-2005¡¶ ¡¶µÍº¸½ÓÁÑÎÆÃô¸ÐÐÔ¸ßÇ¿¶È¸Ö°å¡·
Standard: YB/T4137-2005: Low Welding Crack Susceptibility High Strength Steel Plate
|
|
?Q690CFC/D/E |
? |
|
?Q800CFC/D/E |
? |
|
?JG670CF ?G785CF |
??ÐÒ飺
JGX698-2011¡¶ JG670CF¡¢ JG785CF µÍº¸½ÓÁÑÎÆÃô¸ÐÐÔ¸ßÇ¿¶È¸Ö°å¼¼ÊõÐÒé¡·
Agreement: JGX698-2011: JG670CF and JG785CF Technical Agreement for
Low Welding Crack Susceptibility High Strength Steel Plate
|
²úÆ·¹æ¸ñ
4¡«80¡Á2200¡«3800¡Á6000¡«12000mm
kuÓÎ×îеØÖ·:90-120kg ¼¶ÏµÁдã»ð»Ø»ð¸ßÇ¿¶È¸Ö°å
90-120kg grade series quenched and tempered high s
Ö÷ÒªÓÃ;
±¾²úƷϵÇü·þÇ¿¶È 800¡¢ 890¡¢ 960¡¢ 1030MPa ´ã»ð»Ø»ð½»»õµÄ¸ßÇ¿¶È¸Ö£¬¿ÉÓÃÓÚ¿óɽ¿ª²ÉºÍ¸÷À๤³ÌÊ©¹¤ÓõÄÉ豸£¬Èç×ê»ú¡¢µç²ù¡¢ µç¶¯ÂÖ·¶·³µ¡¢ÍÚ¾ò»ú¡¢×°ÔØ»ú¡¢ÍÆÍÁ»ú¡¢»ìÄýÍÁ±Ã³µ¡¢Ïû·ÀÔÆÌÝ¡¢¸÷ÀàÆðÖØ»ú¼°Ãº¿óҺѹ֧¼ÜµÈ¡£
This product is the quenched and tempered high strength steel plate with the yield strengths of 800, 890, 960 and
1030MPa, suitable for manufacture of equipment used in mining and all kinds of engineering construction, such as drilling rig, electric shovels, electric wheel dump trucks, excavator, loaders, bulldozers, concrete pump truck, fire ladder, various cranes, coal mine hydraulic supports and so on.
Åƺźͱê×¼
|
? Q800C/D/E |
?
±ê×¼£º
GB/T16270-2009¡¶¸ßÇ¿¶È½á¹¹Óõ÷Öʸְ塷
Standard: GB/T16270-2009: Quenched and Tempered Steel Plate for High Strength Structure
|
|
? Q890C/D/E |
? |
|
? Q960C/D/E |
? |
|
? JG1200D |
?
±ê×¼£º
Q/3700LYS 299£2010¡¶¹¤³Ì»úеÓó¬¸ßÇ¿Èͽṹ¸Ö°å¡·
Standard: Q/3700LYS 299£2010: Ultra High Strength and Toughness Structural Steel Plate for Engineering
Machinery
|
²úÆ·¹æ¸ñ
4¡«80¡Á1500¡«3800¡Á6000¡«12000mm
kuÓÎ×îеØÖ·:A¡¢ B¡¢ D¡¢ E ¼¶´¬ÌåÓýṹ¸Ö°å
A, B, D and E grade structural steel plate for shi
Ö÷ÒªÓÃ;
A¡¢B¡¢ D¡¢ E ¼¶ÏµÁвúÆ·¾ßÓÐÁ¼ºÃµÄ×ۺϻúеÐÔÄÜ¡¢º¸½ÓÐÔÄÜ¡¢¹¤ÒÕÐÔÄÜ¡£ÊÊÓÃÓÚÔìÔ¶Ñó¡¢Ñغ£ºÍÄÚºÓº½Çø´¬²°´¬Ìå½á¹¹¡¢´¬Îë¡¢ ²ÉÓÍƽ̨¡¢º£ÑóÖÐÊäË͹ܵÀ¡¢Ñغ£·¢µç³§¡¢ÂëÍ·ÉèÊ©µÈ½á¹¹¼þ¡£
A, B, D, E GRADE SERIES PRODUCTS HAVE GOOD COMPREHENSIVE MECHANICAL PROPERTIES, WELDING PERFORMANCE AND PROCESS PERFORMANCE, SUITABLE FOR MANUFACTURE OF THE STRUCTURAL MEMBERS FOR SHIP HULLS, DOCKS,OIL PLATFORM, MARINE PIPELINE, COASTAL POWER PLANT, WHARF FACILITIES AND OTHER STRUCTURES IN OCEAN, COAST AND INLAND RIVER NAVIGATION AREA.
Åƺźͱê×¼
Åƺţº A¡¢ B¡¢ D¡¢ E£¨ Z25¡¢ Z35£©£»
Grade: A, B, D, E (Z25, Z35);
Ö´Ðбê×¼£º¾Å¹ú´¬¹æ¡¢Óæ¹æ¡¢ GB712-2000¡¶´¬ÌåÓýṹ¸Ö¡·
Applicable standard: Rules for certification by the world's most famous nine recognized classification societies, regulations for fisheries, and GB712-2000 Structural Steel for Ship Hull
²úÆ·¹æ¸ñ
4¡«60¡Á1400¡«4100¡Á4000¡«18000mm
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺3µç»°£º0531-67606362
kuÓÎ×îеØÖ·:¹ú±êHÐ͸Ö
Chinese H-steel
Ö÷ÒªÓÃ;
±¾²úƷΪ¹ú±êϵÁÐ H Ð͸֣¬Ó¦ÓÃÓÚ¸÷Öָֽṹ½¨ÖþÁìÓò¡£
This product is the national standard series h-beam, which is used in various steel structure building fields.
Åƺźͱê×¼
²úÆ·Åƺţº Q235B¡¢ Q345B
Product brands: Q235B, Q345B
Ö´Ðбê×¼£º GB/T 700-2006¡¢ GB/T 1591-2008¡¢ GB/T 11263-2005
Executive standards: GB/T 700-2006, GB/T 1591-2008, GB/T 11263-2005
²úÆ·¹æ¸ñ
¹ú±êϵÁÐÈ«²¿¹æ¸ñ
Gb series full specifications
kuÓÎ×îеØÖ·:ÃÀ±êHÐ͸Ö
American standard H-section steel
Ö÷ÒªÓÃ;
±¾²úƷΪÃÀ±êϵÁÐ H Ð͸֣¬Ó¦ÓÃÓÚ¸÷Öָֽṹ½¨ÖþÁìÓò¡£
This product is an American Standard series H-section steel, suitable for use in various steel structure construction/building fields.
?
Åƺźͱê×¼
²úÆ·ÅƺţºA36¡¢GR50
Product grade: A36, GR50
Ö´Ðбê×¼£ºASTM A36/A36M¡¢ASTM A572/A572M¡¢ASTM A6/A6M
Applicable standard: ASTM A36/A36M, ASTM A572/A572M, ASTM A6/A6M
²úÆ·¹æ¸ñ
ASTM A6/A6M ÄÚËùÓÐ H Ð͹æ¸ñ¡£
ASTM A6/A6M related H-section specification.
?
kuÓÎ×îеØÖ·:Å·±êHÐ͸Ö
EN H-section steel
Ö÷ÒªÓÃ;
±¾²úƷΪŷ±êϵÁÐ H Ð͸֣¬Ó¦ÓÃÓÚ¸÷Öָֽṹ½¨ÖþÁìÓò¡£
This product is an European Norm series H-section steel, suitable for use in various steel structure construction/building fields.
?
Åƺźͱê×¼
²úÆ·Åƺţº S235JR/J0/J2¡¢ S275JR/J0/J2¡¢ S355JR/J0/J2/K2¡¢ S450J0
Product grade: S235JR/J0/J2, S275JR/J0/J2, S355JR/J0/J2/K2, S450J0
Ö´Ðбê×¼£º EN10025¡¢ BS4-1¡¢ EN1003¡£
Applicable standard: EN10025, BS4-1, EN1003.
²úÆ·¹æ¸ñ
BS4-1¡¶½á¹¹ÓÃÐ͸֡·ÄÚËùÓйæ¸ñ¡£
BS4-1 related all specifications under Structural Section Steel.
?
kuÓÎ×îеØÖ·:ÈÕ±êHÐ͸Ö
Japanese standard H-section steel
Ö÷ÒªÓÃ;
±¾²úƷΪÈÕ±êϵÁÐ H Ð͸֣¬Ó¦ÓÃÓÚ¸÷Öָֽṹ½¨ÖþÁìÓò¡£
This product is a Japanese Standard series H-section steel, suitable for use in various steel construction/structure building fields. .
?
Åƺźͱê×¼
²úÆ·Åƺţº SS330¡¢ SS400¡¢ SS490¡¢ SM400A/B/C¡¢ SM490 A/B/C¡¢ SM490YA/YB¡¢SN400A/B/C¡¢ SN490B/C
Product grade: SS330, SS400, SS490, SM400A/B/C, SM490 A/B/C, SM490YA/YB, SN400A/B/C, SN490B/C
Ö´Ðбê×¼£º JIS 310¡¢ JIS 3106¡¢ JIS G3136¡¢ JIS 3192¡£
Applicable standard: JIS 310, JIS 3106, JIS G3136, JIS 3192.
?
²úÆ·¹æ¸ñ
JIS 3192 ÄÚËùÓÐ H Ð͹æ¸ñ¡£
JIS 3192 related allH -section steel specification.
?
kuÓÎ×îеØÖ·:°Ä±êHÐ͸Ö
Australian Standard H-section steel
Ö÷ÒªÓÃ;
±¾²úƷΪ°Ä±êϵÁÐ H Ð͸֣¬Ó¦ÓÃÓÚ¸÷Öָֽṹ½¨ÖþÁìÓò¡£
This product is an Australian Standard series H-section steel, suitable for use in various steel structure construction/building fields.
?
Åƺźͱê×¼
²úÆ·Åƺţº Grade300
Product grade: Grade300
Ö´Ðбê×¼£º AS/NZS 3679.1:19JISG3192
Applicable standard: AS/NZS 3679.1: 19JISG3192
²úÆ·¹æ¸ñ
AS/NZS 3679.1:19JISG3192 ÄÚËùÓÐ H Ð͹æ¸ñ¡£
AS/NZS 3679.1: 19JISG3192 related all H-section steel specification.
?
kuÓÎ×îеØÖ·:¶í±êHÐ͸Ö
Russian Standard H¨Csection steel
Ö÷ÒªÓÃ;
±¾²úƷΪ¶í±êϵÁÐ H Ð͸֣¬Ó¦ÓÃÓڸֽṹ½¨Öþ¡¢Ê¯Ó͹¤³ÌÁìÓò¡£
This product is a Russian Standard series H-section steel, suitable for use in steel structure construction/building and petroleum engineering fields.
?
Åƺźͱê×¼
²úÆ·Åƺţº C245¡¢ C255¡¢ C345
Product grade: C245, C255, C345
Ö´Ðбê×¼£º §ã§ä§à §¡§³§¹§® -20-93
Applicable standard: §ã§ä§à §¡§³§¹§® -20-93
?
²úÆ·¹æ¸ñ
35§º2¡£
kuÓÎ×îеØÖ·:Ä͵ÍÎÂÓÃHÐ͸Ö
Low temperature resistant H¨Csection steel
Ö÷ÒªÓÃ;
±¾²úÆ·Ö÷ÒªÓ¦ÓÃÓÚ»úеÖÆÔì¡¢¸ß²ã½¨Öþ¡¢ÇÅÁºÕ¢°ÓµÈÐÐÒµ£¬ÌرðÊDZ±·½º®ÀäµØÇøÄ͵ÍÎÂÒªÇóµÄÒ½Ôº¡¢ÌåÓý³¡¹Ý¡¢É̳¡¡¢½»Í¨ÊàŦ µÄÖØ´ó½¨Öþ¹¤³ÌºÍ¸Ö¹¹ÖС£
This product is mainly used in machinery manufacturing, high-rise buildings, bridges, gates/dams and other industries, especially the major construction projects and steel structure in the hospitals, stadiums, shopping malls, transportation hubs in the northern cold areas where there is a requirement for low temperature.
?
Åƺźͱê×¼
²úÆ·Åƺţº Q345C/D/E/EL¡¢ Q420D/EM¡¢ Q460EM
Product grade:Q345C/D/E/EL ,Q420D/EM ,Q460EM
Ö´Ðбê×¼£º GB/T 1591 ºÍ¼¼ÊõÐÒé
Applicable standard: GB/T 1591 and technical agreement
?
²úÆ·¹æ¸ñ
H100¡Á100¡«H900¡Á300
kuÓÎ×îеØÖ·:¸ßÇ¿¶ÈHÐ͸Ö×®
High strength H¨Csection steel pile
Ö÷ÒªÓÃ;
±¾²úÆ·ÊÊÓÃÓÚÏã¸Û¡¢¶«ÄÏÑǵȵØÇøÉî»ù¿Ó½¨É裬Ö÷ÒªÓÃ×÷¸ß²ã½¨Öþ»ù´¡ºÍÖ÷Òª³ÐÖؽṹÖÆ×÷¡£
This product is suitable for deep foundation pit construction in Hongkong, Southeast Asia and other areas, mainly used in high-rise building foundation and the main load-bearing structure.
?
Åƺźͱê×¼
²úÆ·Åƺţº S450J0
Product grade: S450J0
Ö´Ðбê×¼£º GB/T 11263
Applicable standard: GB/T 11263
²úÆ·¹æ¸ñ
UC305¡Á305 ϵÁÐ
UC305¡Á305 Series
kuÓÎ×îеØÖ·:ÄÍ»ðÄͺòHÐ͸Ö
Fire resistant and weather resistant H-section ste
Ö÷ÒªÓÃ;
±¾²úÆ·ÊÊÓÃÓÚ¶ÔÄͺòÐÔÄܺͷÀ»ðÐÔÄÜÓÐÒ»¶¨ÒªÇóµÄ¸Ö½á¹¹½¨Öþ¹¤³Ì¡£
The product is suitable for the steel structure construction engineering which has certain requirements for weather resistance and fireproof performance.
?
Åƺźͱê×¼
²úÆ·ÅƺţºLWFR490
Product grade: LWFR490
Ö´Ðбê×¼£ºGB/T 1591 ºÍ¼¼ÊõÐÒé
Applicable standard: GB/T 1591 and technical agreement
²úÆ·¹æ¸ñ
H100¡Á100¡«H900¡Á300
kuÓÎ×îеØÖ·:¿¹ÕðÐÔÄÜHÐ͸Ö
Seismic resistant H-section steel
Ö÷ÒªÓÃ;
±¾²úÆ·Ö÷ÒªÔÚµØÕð¶à·¢µØÇø¸Ö½á¹¹ÁìÓòÓ¦Óã¬Ö÷ÒªÓ¦ÓÃÓÚ½¨ÉèÒ½Ôº¡¢ÌåÓý³¡¹Ý¡¢É̳¡¡¢ ½»Í¨ÊàŦÒÔ¼°µØÕð±ÜÄѳ¡ËùµÈÈËÔ±Ãܼ¯µÄ ¹«¹²·þÎñÉèÊ©¹ú¼Ò¹«¹²°²È«µÄÖØ´ó½¨Öþ¹¤³Ì¡£
This product is mainly used in the steel structure field of the earthquake prone areas, mainly suitable for construction of hospitals, stadiums, shopping malls, transportation hubs, earthquake shelters and other crowded public service facilities and major construction projects for national public security.
?
Åƺźͱê×¼
²úÆ·Åƺţº Q345S
grade: Q345S
Ö´Ðбê×¼£º GB11263
Applicable standard: GB11263
²úÆ·¹æ¸ñ
HH250¡Á250~H900¡Á300
kuÓÎ×îеØÖ·:ºËµçÓÃHÐ͸Ö
H-section steel for nuclear power plant
Ö÷ÒªÓÃ;
Ôں˵ºÄÚÖ÷ÒªÓÃÓÚÄ£¿éÖ§¼ÜµÄÖÆ×÷£¬¶ÔÖÊÁ¿ÒªÇóÑϸñ£¬ÇÒÒªÇó¾ßÓÐÒ»¶¨µÄÄ͸¯Ê´ÄÜÁ¦¡£
Mainly used within the nuclear island for the manufacture of the module supports, which has strict requirements for quality, and requirements for a certain corrosion resistance.
?
Åƺźͱê×¼
²úÆ·Åƺţº S235J0
Product grade: S235J0
Ö´Ðбê×¼£º EN10025¡¢ BS4-1¡¢ EN10034
Applicable standard: EN10025, BS4-1, EN10034
²úÆ·¹æ¸ñ
HEB 100¡¢ HEB 140¡¢ HEB 200
kuÓÎ×îеØÖ·:´¬Ì弰ʯÓ͹¤³ÌÓøÖ
Steel for ship hulls and petroleum projects
Ö÷ÒªÓÃ;
Ö÷ÒªÓ¦ÓÃÓÚ´¬²°ÄÚ²¿¹¹ÔìÓýṹ¼þ¡£Ê¯ÓÍƽ̨Óà H Ð͸ÖÓ¦ÓÃÓÚʯÓÍƽ̨ÕûÌå½á¹¹½¨ÔìÁìÓò¡£
Mainly used for structural parts of internal structures of ships. Petroleum platform H-section steel is used in the construction of integral structure of petroleum platform.
Åƺźͱê×¼
²úÆ·Åƺţº SM490YB¡¢ A¡¢ D¡¢ D36¡¢ AH32¡¢ DH36¡£
?Product grade: SM490YB, A, D, D36, AH32, DH36.
Ö´Ðбê×¼£º JIS G3106¡¢ GB 712-2000¡¢ ASTM A578-B
Applicable standard: JIS G3106, GB 712-2000, ASTM A578-B
?
²úÆ·¹æ¸ñ
¹ú±ê¡¢Ó¢±ê¡¢ÃÀ±êºÍÅ·±êµÈ¹æ¸ñ²úÆ·¡£
Chinese Standard, British standard, European Standard, American Standard and other specifications for products.
kuÓÎ×îеØÖ·:Ìú·½Ó´¥ÍøÖ§ÖùÓÃHÐ͸Ö
H-section steel for pillars/supports of railway ca
Ö÷ÒªÓÃ;
Ö÷ÒªÓ¦ÓÃÓÚÌú·ÁìÓòµÄ½Ó´¥ÍøÖ§Öù£¬ÊǸֽî»ìÄýÍÁ½Ó´¥ÍøÖ§ÖùµÄÌæ´ú²úÆ·¡£
Mainly used in manufacture of the pillars/supports for railway catenary system, as an alternative product of the reinforced concrete pillars/supports for the catenary system.
Åƺźͱê×¼
²úÆ·Åƺţº Q235B/C/D¡¢ Q345B/C/D/E
Product grade: Q235B/C/D, Q345B/C/D/E
Ö´Ðбê×¼£º GB/T 700¡¢ DIN 1025-2¡¢ EN 10034
Applicable standard: GB/T700 , DIN 1025-2 , EN 10034
²úÆ·¹æ¸ñ
IPB240¡¢ IPB£¨ V£© 240T¡¢ IPB260¡¢ IPB280¡¢ IPB300
kuÓÎ×îеØÖ·:µçÍø½¨ÉèÓôó½Ç¸Ö
Large-sized angle steel for power grid constructio
Ö÷ÒªÓÃ;
Ö÷ÒªÓÃÓÚ³¬¸ßѹÊäµçÏß·ÖеÄÌúËþÖÆ×÷£¬¾ßÓÐÇ¿¶È¸ß¡¢³ÐÔØÄÜÁ¦´óµÄÌص㣬¿ÉÒÔÓÐЧÌá¸ßÌúËþµÄ°²È«ÐÔÄÜ£¬Í¬Ê±»¹¿ÉÒÔ¼õÉÙÌúËþÕûÌåÖØÁ¿£¬½µµÍÌúËþÖÆ×÷³É±¾¡£
Mainly used in fabrication of tower for EHV power transmission line, characterized by high strength and large
load-bearing capacity, capable to effectively improve the safety performance of the tower, and also reduce the overall weight of the tower and lower the cost for tower manufacturing.
?
Åƺźͱê×¼
²úÆ·Åƺţº Q345B¡¢ Q420B¡¢ Q420C¡¢ Q420D¡¢ Q460C¡¢ Q460D
Product grade: Q345B, Q420B, Q420C, Q420D, Q460C, Q460DÖ´Ðбê×¼£º GB/T 700
Applicable standard: GB/T 700
²úÆ·¹æ¸ñ
¡Ï220¡¢¡Ï250 ϵÁÐ
¡Ï220, ¡Ï250 SerieskuÓÎ×îеØÖ·:¿óɽ¹¤³ÌÓøÖ
Steel for mining projects
Ö÷ÒªÓÃ;
Ö÷ÒªÓÃÓÚ¿óɽËíµÀÖ§»¤£¬ÌرðÊÇһЩΧÑÒ±äÐÎÁ¿½Ï´óµÄÏïµÀ£¬Ò²¶Ô¿óÓÃÖ§»¤Ð͸ֵÄÐÔÄÜÌá³öÁËÌØÊâµÄÒªÇó¡£
Mainly used in mine tunnel supports, especially for some roadways with relatively large deformation of surrounding rock, and also used in structures with special requirements for the performance of the mine supporting steel.
Åƺźͱê×¼
²úÆ·Åƺţº 20MnVK¡¢ Q275
Product grade: 20MnVK, Q275
Ö´Ðбê×¼£º YB/T 5047-2000
Ö´Ðбê×¼£º YB/T 5047-2000
²úÆ·¹æ¸ñ
9¡¢ 11¡¢ 12¡¢ 29U¡¢ 36U
kuÓÎ×îеØÖ·:Ìú·³µÁ¾´óÁºÓøÖ
Steel used for frame of railway vehicle
Ö÷ÒªÓÃ;
Ö÷ÒªÓÃÓÚ 70 ¶Ö¼°ÒÔÉϵÄÌúµÀ³µÁ¾Æ½³µµÄ´óÁº¡£
Mainly used in manufacture of the frame for the railway vehicle platform wagon of 70 tons and above.
Åƺźͱê×¼
²úÆ·Åƺţº Q420NQR1
Product grade: Q420NQR1
?Ö´Ðбê×¼£º YB/T5182
Applicable standard: YB/T5182
?
²úÆ·¹æ¸ñ
630¡Á200 ϵÁÐ
630¡Á200 Series
kuÓÎ×îеØÖ·:Æû³µ´óÁºÓøÖ
Steel for automobile frame
Ö÷ÒªÓÃ;
±¾²úƷΪרÓÃÐ͸֣¬Ö÷ÒªÓ¦ÓÃÓÚÆû³µ¡¢¹Ò³µ¡¢°ë¹Ò³µ´óÁº£¬ÊǺ¸½Ó H Ð͸ֵÄÌæ´ú²úÆ·¡£
This product is a dedicated steel, mainly used in manufacture of frames for automobile, trailer and semi-trailer girder, as an alternative to the welded H -section steel.
?
Åƺźͱê×¼
²úÆ·Åƺţº LG510LH¡¢ LG610LH¡¢ LG710LH
Product grade: LG510LH, LG610LH, LG710LHÖ´Ðбê×¼£º GB/T 11263
Applicable standard: GB/T 11263
²úÆ·¹æ¸ñ
446¡Á150¡¢ 456¡Á150¡¢ 470¡Á150¡¢ 482¡Á153.5¡¢ 492¡Á150¡¢ 504¡Á153
kuÓÎ×îеØÖ·:²æ³µÃżÜÓøÖ
Steel for forklift portal-frame
Ö÷ÒªÓÃ;
¸Ã²úÆ·Ö÷ÒªÓ¦ÓÃÓڲ泵ÖÆÔìÒµ£¬Ö÷ÒªÓÃÓÚÖÆ×÷ 1.5¡«10t ¹æ¸ñ²æ³µµÄÃżÜÖÆ×÷¡£
This product is mainly used in forklift manufacturing industry mainly for manufacture of portal frame for forklift truck of 1.5~10t.
Åƺźͱê×¼
²úÆ·Åƺţº HRB335¡¢ 20MnSi¡¢ 20MnSiV¡¢ Q420C¡¢ Q440C¡¢ Q460C
Product grade: HRB335, 20MnSi, 20MnSiV, Q420C, Q440C, Q460CÖ´Ðбê×¼£º Q/3700LYS247
Applicable standard: Q/3700LYS247
²úÆ·¹æ¸ñ
C140b¡¢ C160a/b¡¢ C164b¡¢ C180b¡¢ C200b¡¢ C220b¡¢ C250b£» J160a¡¢J160b¡¢ H120¡¢ H140¡£
kuÓÎ×îеØÖ·:ÂÄ´ø°å
Track plate
Ö÷ÒªÓÃ;
ÂÄ´ø°åÖ÷ÒªÓÃ×÷Á´¹ìʽÍÚ¾ò»ú¡¢ÍÆÍÁ»úµÄÐÐ×ß²¿¼þ¡£
Track plate is mainly used for manufacture of the travelling parts of track-mounted excavator and bulldozer
Åƺźͱê×¼
²úÆ·Åƺţº 25MnB¡¢ 23MnBM
Product grade: 25MnB, 23MnBMÖ´Ðбê×¼£º ¡¶ÂÄ´øÓÃÈÈÔþÐ͸ּ¼ÊõÐÒé¡·
Applicable standard: Technical Agreement on Hot-rolled Section Steel for Track
²úÆ·¹æ¸ñ
LW190¡Á8.5¡¢ LW190¡Á10¡¢ LW135¡Á6
kuÓÎ×îеØÖ·:ÖеÍËÙ´ÅÐü¸¡Áгµ¹ìÅÅ
Middle and low speed Maglev train track skeleton
Ö÷ÒªÓÃ;
Ó¦ÓÃÓÚÖеÍËÙ´ÅÐü¸¡Áгµ¹ìµÀ¡£
Used in medium and low speed maglev train track.
Åƺźͱê×¼
²úÆ·Åƺţº Q235B¡¢ LWR345B¡¢ LWR345C¡¢ LWR295D
Product grade: Q235B, LWR345B, LWR345C, LWR295DÖ´Ðбê×¼£º Q/LYS 280¡¢ Q/CYBM 004
Applicable standard: Q/LYS 280, Q/CYBM 004
²úÆ·¹æ¸ñ
LGF372¡Á96¡¢ LGF372¡Á96WR¡¢LGH230¡Á200Z¡¢ LGH230¡Á200ZWR
kuÓÎ×îеØÖ·:º£Ñ󹤳ÌÓøÖ
Steel for ocean projects
Ö÷ÒªÓÃ;
Ö÷ÒªÓ¦ÓÃÓÚº£ÑóʯÓÍƽ̨ÕûÌå½á¹¹½¨Ôì ¡¢Æ½Ì¨ÅäÌ׺£Éϸ¡Ê½´¢ÓÍ´¬£¨FPSO £©Ä£¿éÖÆ×÷¡¢´¬²Õ¶¥Áº¼°¿ò¼ÜµÈ½á¹¹ÖÆÔì¡£
Mainly used in construction of offshore oil platform structure, fabrication of platform supported Float Production
Storage and Offloading (FPSO ) module, manufacture of roof beam and frame structure of cabin.
Åƺźͱê×¼
²úÆ·Åƺţº S275J2¡¢ S355NL
Product grade: S275J2, S355NLÖ´Ðбê×¼£º DNV¡¢ EN10025-3
Applicable standard: DNV, EN10025-3
²úÆ·¹æ¸ñ
H200B¡«HE1000B£¬ UPN ϵÁв۸֡¢UPE ϵÁС¢ IPE ϵÁС¢½Ç¸ÖϵÁÐ
H200B~HE1000B and UPN series channel steel, UPE series, IPE series and angle steel series
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺2µç»°£º0531-67606362
kuÓÎ×îеØÖ·:¸ß¶Ë³ÝÂÖ¸Ö
High-end gear steel
Ö÷ÒªÓÃ;
¾ßÓÐÁ¼ºÃµÄÇ¿¶È¡¢ÈÍÐÔ¼°Îȶ¨ÐÔ¡£ÓÃÓÚеװ±¸ÖеÄÖØÒªÁã¼þ£¬Èç»ú´²¡¢·É»ú¡¢Æû´¬¼°·çÉȵȡ£
Provided with good strength, toughness and stability, suitable for use in the manufacture of important parts in mechanical equipment, such as machine tools, aircraft, steam boats, fans, etc..
Åƺźͱê×¼
²úÆ·Åƺţº SCM822H¡¢ SAE8620H¡¢ 18NiCrMo5¡¢
Product grade: SCM822H, SAE8620H, 18NiCrMo5,
Ö´ ÐÐ ±ê ×¼ £º Q/370000SGT 103-2013 ¡¢ Q/370000SGT 100-2013 ¡¢EN10084-2008
Applicable standards: Q/370000SGT 103-2013, Q/370000SGT 100-2013, EN10084-2008
²úÆ·¹æ¸ñ
¦µ20¡«¦µ310
kuÓÎ×îеØÖ·:¸ß¶ËÖá³Ð¸Ö
High-end bearing steel
Ö÷ÒªÓÃ;
¾ßÓнϸߵĴã͸ÐÔ¡¢ÄÍÄ¥ÐÔ£¬Æ£ÀÍÐÔÄÜÁ¼ºÃ¡£ÓÃÓڵ綯»ú¡¢·¢µç»ú¡¢ÄÚȼ»ú¡¢È¼ÆûÂÖ»ú¡¢»ú´²Ö÷ÖáµÈ±äËÙ×°Öá£
Provided with high hardenability, wear resistance and good fatigue performance, suitable for use in manufacture of motor, generator, internal-combustion engine, steam turbine, machine tool spindle and other speed changing devices.
Åƺźͱê×¼
²úÆ·Åƺţº GCr15SiMn
Product grade: GCr15SiMn
Ö´Ðбê×¼£º GB/T18254-2002
Applicable standard: GB/T18254-2002
²úÆ·¹æ¸ñ
¦µ20~¦µ310
kuÓÎ×îеØÖ·:Ìú·ÓøÖ
Railway Steel
Ö÷ÒªÓÃ;
¾ßÓнϸߵÄÇ¿¶È¡¢Ä͵Íγå»÷ÐÔÄÜ¡£Ê¹ÓÃÓÚÀ»õ»ð³µ³µÏáÁ¬½Ó¼þ×°Öõȡ£
Provided with high strength and low temperature impact resistance, suitable for use in manufacture of the connecting pieces for freight train carriage and other devices
Åƺźͱê×¼
²úÆ·Åƺţº 25MnCrNiMoA
Product grade: 25MnCrNiMoA?
Ö´Ðбê×¼£º¼¼ÊõÐÒé
Applicable standard: Technical agreement
²úÆ·¹æ¸ñ
¦µ20¡«¦µ310
kuÓÎ×îеØÖ·:·çµçÓøÖ
Steel for wind power
Ö÷ÒªÓÃ;
¾ßÓнϸßÇ¿¶È¡¢Á¼ºÃµÄÄ͵Íγå»÷ÐÔÄÜ¡£Ê¹ÓÃÓÚ·çµçÐÐÒµ¡£
Provided with high strength and good low temperature impact resistance, suitable for use in wind power industry.
Åƺźͱê×¼
²úÆ·Åƺţº S355NL
Product grade: S355NL
Ö´Ðбê×¼£º¼¼ÊõÐÒé
Applicable standard: Technical agreement
²úÆ·¹æ¸ñ
¦µ350¡«¦µ800
kuÓÎ×îеØÖ·:ʯÓ͹ÜÏßÓÃÁ¬ÖýÔ²Å÷
Continuous casting round billet for petroleum pipe
Ö÷ÒªÓÃ;
¾ßÓнϸߵÄÇ¿¶È¼°¿¹Áò»¯ÇⸯʴÐÔÄÜ¡£ÓÃÓÚʯÓÍ»¯¹¤ÐÐÒµ¡£
Provided with high strength and hydrogen sulfide corrosion resistance, suitable for petrochemical industry.
Åƺźͱê×¼
²úÆ·Åƺţº X52NS
Product grade: X52NS
Ö´Ðбê×¼£º¼¼ÊõÐÒé
Applicable standard: Technical agreement
²úÆ·¹æ¸ñ
¦µ350~¦µ800
kuÓÎ×îеØÖ·:ϵ²´Á´¼°´¬ÓÃêÁ´ÓøÖ
Steel for mooring chain and marine anchor chain
Ö÷ÒªÓÃ;
¾ßÓиßÇ¿¶È¡¢Á¼ºÃµÄÈÍÐÔ£¬¶øÇÒ¾ßÓкõÄÄͺ£Ë®¸¯Ê´¡¢ÄÍÄ¥ËðÐÔÄÜ¡£Ê¹ÓÃÓÚº£ÑóʯÓÍ¿ª²É¼°´¬²°¹¹¼þµÈ¡£
Provided with high strength and good toughness as well as good resistance to seawater corrosion and abrasion resistance, suitable for use in manufacture of structural components for offshore oil production and ship.
Åƺźͱê×¼
²úÆ·Åƺţº CM490¡¢ CM690
Product grade: CM490, CM690
Ö´Ðбê×¼£º GB/T 18669
Applicable standard: GB/T 18669
²úÆ·¹æ¸ñ
¦µ20~¦µ310
kuÓÎ×îеØÖ·:Ä£¾ßÓøÖ
Die steel
Ö÷ÒªÓÃ;
´ã͸ÐԸߣ¬ÈÈ´¦Àí±äÐÎÂʽϵͣ¬ÆäÐÔÄܼ°Ê¹ÓÃÊÙÃü¸ß¡£Ê¹ÓÃÓÚÄ£¶Í´¸¶ÍÄ£¡¢ÂÁºÏ½ðѹÖýÄ£¡¢Èȼ·Ñ¹Ä£¾ß¡¢¸ßËÙ¾«¶ÍÄ£¾ß¼°¶ÍÔìѹ Á¦»úÄ£¾ß¡£
Provided with high hardenability, low deformation rate of heat treatment, high performance and long service life, Suitable for use in manufacture of die forging hammer forging die, aluminum alloy die-casting die, hot extrusion die, high speed precision forging die and forging press die.
Åƺźͱê×¼
²úÆ·Åƺţº H13
Product grade: H13
Ö´Ðбê×¼:GB/T1299¡ª2000
Applicable standards: GB/T1299-2000
²úÆ·¹æ¸ñ
¦µ20¡«¦µ310
kuÓÎ×îеØÖ·:¸ßѹ¹ø¯ÓÃÎÞ·ì¸Ö¹ÜÓøÖ
Steel for seamless steel tubes for high pressure b
Ö÷ÒªÓÃ;
¾ßÓÐÁ¼ºÃµÄËÜÐÔ¡¢ º¸½ÓÐÔÄܼ°Á¼ºÃµÄ¿¹¸ßÎÂÑõ»¯¼°Ä͸¯Ê´ÐÔÄÜ¡£ ÓÃÓÚ¸ßѹ¹ø¯¯±Ú¡¢ºËµçÈȽ»»»Æ÷¡¢Ê¯ÓÍÁÑ»¯×°Öõȡ£
Provided with good plasticity and weldability as well as good resistance to high temperature oxidation and corrosion resistance, suitable for use in manufacture of high-pressure boiler wall, nuclear power heat exchanger, petroleum cracking device, etc..
Åƺźͱê×¼
²úÆ·Åƺţº P91
Product grade: P91
Ö´Ðбê×¼£ºGB/T5310-2008 »ò¼¼ÊõÐÒé
Applicable standard: GB/T5310-2008 or technical agreement
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺4µç»°£º0531-67606362
kuÓÎ×îеØÖ·:Æû³µ´óÁºÓÃÈÈÔþ¸Ö´ø
Hot rolled steel strip for automobile frame
Ö÷ÒªÓÃ;
Æû³µ´óÁºÏµÁÐÓøֲúÆ·Ö÷ÒªÓÃÓÚÉÌÓóµµÄÖ÷Áº¡¢ºáÁº¡¢±ßÁººÍ³µÌåµÈÆû³µ½á¹¹ÐÔ²¿¼þ¡£ÒªÇó¾ßÓÐ×ã¹»µÄ¿¹ÀÇ¿¶È¡¢Çü·þÇ¿¶È¡¢Á¼ ºÃµÄ³ÉÐÍÐÔ¡¢½Ï¸ßµÄÑÓÉìÂʺÍÓÅÁ¼µÄÀäÍäÐÔÄÜ£¬¿ÉÂú×ã¼ôÇС¢ÕÛÍä¡¢³åѹ¡¢¹õѹ¡¢³å¿×ºÍº¸½ÓµÈ¶àÖÖ¼Ó¹¤ÒªÇó£¬ÊµÎïÐÔÄÜÎȶ¨¡£
AUTOMOBILE FRAME SERIES STEEL PRODUCTS ARE MAINLY USED IN MANUFACTURE OF THE MAIN BEAM, CROSSBEAM, SIDE-BEAM AND CAR BODY AND OTHER STRUCTURAL PARTS OF THE COMMERCIAL VEHICLE, WHICH ARE REQUIRED TO BE PROVIDED WITH SUFFICIENT TENSILE STRENGTH, YIELD STRENGTH, GOOD FORMABILITY, HIGH ELONGATION AND EXCELLENT COLD BENDING PROPERTIES THAT CAN MEET THE REQUIREMENTS OF SHEARING, BENDING, STAMPING, ROLL PRESSING, PUNCHING, WELDING AND OTHER PROCESSINGS, WITH STABLE PHYSICAL PROPERTIES.
Åƺźͱê×¼
Åƺţº 510L¡¢ 610L¡¢ 700L¡¢ J700¡¢ J800 QStE380TM¡¢ QStE420TM¡¢ QStE460TM¡¢ QStE500TM¡¢ QStE700TMS420MC¡¢ S460MC¡¢S500MC¡¢ S550MC¡¢ S600MC¡¢ S650MC¡¢ S700MC
Grade: 510L, 610L, 700L, J700, J800 QStE380TM, QStE420TM, QStE460TM, QStE500TM, QStE700TMS420MC, S460MC, S500MC, S550MC, S600MC, S650MC, S700MC
Ö´Ðбê×¼£º GB3273-2005¡¶Æû³µ´óÁºÓÃÈÈÔþ¸Ö°åºÍ¸Ö´ø¡·SEW092-1990¡¶Àä³ÉÐ͵ÄÈÈÔþϸ¾§Á£¸Ö¡·DIN EN 10149-2£º 1996¡¶Àä³É ÐÍÓõĸßÇü·þµã¸ÖÈÈÔþ±â¸Ö²úÆ·¡·
Applicable standard: GB3273-2005: Hot-Rolled Steel Plate and Steel Strip for Automobile Frame SEW092-1990: Cold Formed Hot-Rolled Fine Grain Steel DIN EN 10149-2: 1996 Hot Rolled Flat Steel Products with High Yield Point for Cold Forming
²úÆ·¹æ¸ñ
1.2¡«25.4¡Á830¡«1900mm
kuÓÎ×îеØÖ·:Æû³µ³µÂÖÓÃÈÈÔþ¸Ö´ø
HOT ROLLED STEEL STRIP FOR AUTOMOBILE WHEEL
Ö÷ÒªÓÃ;
Æû³µ³µÂÖϵÁÐÓøÖÖ÷ÒªÓÃÓÚÖÆÔìÆû³µ¹öÐͳµÂÖµÄÂÖ·øºÍÂÖéþ£¬ÒªÇó¾ßÓÐÁ¼ºÃµÄÑÓÉì͹ԵÐÔ¡¢Àä³ÉÐÍÐÔ¡¢ÉÁ¹âº¸½ÓÐÔ¼°Æ£ÀÍÐÔÄÜµÈ ×ۺϻúеÐÔÄÜ£¬¶øÇÒÓ¦¾ßÓÐÁ¼ºÃµÄ±íÃæÖÊÁ¿ºÍΪ±£Ö¤³µÂÖµÄÆøÃÜÐÔ¼°ÆäÔËÐÐʱ²»²úÉú´óµÄÐýתÕñ°Ú»òʧºâµÄ³ß´ç¹«²î¡£
Automobile wheel series steel products is mainly used for manufacture of spokes and rim for rolling-type wheel of a automobile, which are required to be provided with good flange elongation, cold forming, flash welding, fatigue properties and other mechanical properties, and should also have good surface quality and the dimensional tolerance to ensure the air tightness of the wheel and no large rotating vibration pendulum occurring in its operation.
Åƺźͱê×¼
Åƺţº 330CL¡¢ 380CL¡¢ 420CL¡¢ 490CL¡¢ SAPH310SAPH370¡¢ SAPH400¡¢ SAPH440¡¢ SH540FB¡¢ SH580FB¡¢ HR440/580HE
Grade: 330CL, 380CL, 420CL, 490CL, SAPH310SAPH370, SAPH400, SAPH440, SH540FB, SH580FB, HR440/580HE
Ö´Ðбê×¼£ºYB/T4151-2006¡¶Æû³µ³µÂÖÓÃÈÈÔþ¸Ö°åºÍ¸Ö´ø¡·JISG3113¡¶Æû³µ½á¹¹ÓÃÈÈÔþ¸Ö°åºÍ¸Ö´ø¡·¼°¹«Ë¾Äڿرê×¼ SGYJ-001-2015 ¡¶Æû³µ³µÂÖÓøßÇ¿¶ÈÈÈÔþ¸ßÀ©¿×¸Ö¸Ö°åºÍ¸Ö´ø¡·GBT 20887.2-2010 ¡¶Æû³µÓøßÇ¿¶ÈÈÈÁ¬Ôþ¸Ö°å¼°¸Ö´ø µÚ 2 ²¿·Ö£º ¸ßÀ©¿×¸Ö¡·
Applicable standard: YB/T4151-2006: Hot-Rolled Steel Plate and Steel Strip for Automobile Wheel JISG3113: Hot Rolled Steel Plate and Steel Strip for Automotive Structures and SISG¡¯s internal quality standards SGYJ-001-2015: High Strength Hot Rolled High Reaming Steel Plate and Steel Strip for Automobile Wheel GBT 20887.2-2010: High Strength Hot Rolled Steel Plate and Steel Strip for Automobile-Section 2 : High Reaming Steel
²úÆ·¹æ¸ñ
1.2¡«25.4¡Á830¡«1900mm
kuÓÎ×îеØÖ·:Æû³µÓøßÇ¿¶ÈÈÈÔþË«Ïà¸Ö´ø
High strength hot rolled dual-phase steel strip fo
Ö÷ÒªÓÃ;
ÈÈÔþË«Ïà¸ÖÒ»°ãÓÃÓÚÐè¸ßÇ¿¶È¡¢¸ßµÄ¿¹ÅöײÎüÊÕÄÜÇÒÓÐÒ»¶¨³ÉÐÍÒªÇóµÄÆû³µÁã¼þ£¬Èç³µÂÖ¡¢±£Ïոܡ¢Ðü¹Òϵͳ¼°Æä¼ÓÇ¿¼þµÈ¡£ÈÈ ÔþË«Ïà¸Ö¾ßÓÐÇ¿¶È¸ß¡¢ÇüÇ¿±ÈµÍ¡¢³õʱ¼Ó¹¤Ó²»¯ÂʸßÒÔ¼°Ç¿¶ÈºÍÈÍÐÔÁ¼ºÃÅäºÏµÈÓŵ㣬·ûºÏÆû³µ²ÄÁÏÇáÁ¿»¯¡¢¸ßÐÔÄÜ¡¢°²È«¡¢»·±£¡¢ ½ÚÄܵķ¢Õ¹Ö÷Ì⣬´Ó¶øÔÚÆû³µÐÐÒµµÃµ½Á˽ÏΪ¹ã·ºµÄÓ¦Óá£
The hot rolled dual-phase steel is generally used for automotive parts with high strength, high impact resistance and absorbing energy and should meet a certain forming requirement, such as wheels, bumpers, suspension systems and their reinforcing parts. The hot rolled dual phase steel is provided with high strength, low yield ratio, high initial processing hardening rate, excellent matching between strength and toughness and other advantages, in line with the development theme of lightweight, high performance, safety and environmental protection, energy saving for automotive materials, which has thus been widely used in the automotive industry.
Åƺźͱê×¼
Åƺţº DP540¡¢ DP600
Grade: DP540, DP600
Ö´Ðбê×¼£º JGX677-2010 ¡¶¸ßÇ¿¶ÈÈÈÔþË«Ïà¸Ö°åºÍ¸Ö´ø¹©»õ¼¼ÊõÌõ¼þ¡·GB/T20887.3-2010 Æû³µÓøßÇ¿¶ÈÈÈÁ¬Ôþ¸Ö°å¼°¸Ö´ø-µÚÈý ²¿·Ö£¬Ë«Ïà¸Ö
Applicable standard: JGX677-2010: Technical Requirements for Supply of High Strength Hot Rolled Dual-Phase Steel Plate and Strip
GB/T20887.3-2010: High Strength Hot Rolled Steel Plate and Steel Strip for Automobile - Section III-Dual Steel
²úÆ·¹æ¸ñ
1.2¡«25.4¡Á830¡«1900mm
kuÓÎ×îеØÖ·:Æû³µ´«¶¯ÖáÓÃÈÈÔþ¸Ö´ø
Hot rolled steel strip for automobile transmission
Ö÷ÒªÓÃ;
Ö÷ÒªÓÃÓÚÖÆ×÷Æû³µ´«¶¯Öá¹Ü£¬ÓÉÓÚ´«¶¯Öá¹ÜÖ÷Òª×÷ÓÃÊÇÖ§³Å»ØתÌå¡¢´«µÝ¶¯Á¦£¬¹ÊÒªÇó²ÄÁÏÓ¦¾ßÓУº×ã¹»µÄÇ¿ ¶È¡¢¸Õ¶ÈºÍÒ»¶¨µÄÈÍÐÔÒÔ¼°½Ï¸ßµÄÆ£ÀÍÇ¿¶È£¬ ¼´ÒªÇóÔ²ÄÁϾßÓÐÁ¼ºÃµÄ×ÛºÏÁ¦Ñ§ÐÔÄÜ¡£ ÖÆÔìÆû³µ´«¶¯Öá¹ÜÒ»°ã²ÉÓÃÖ±·ìº¸½Ó¹¤ÒÕ£¬ ³ß´ç¿ØÖƹ¤ÒÕ²ÉÓÃͨ¹ý¿ØÖÆÍ⾶À´¿ØÖÆÄÚ¾¶³ß´çµÄ·½·¨£¬Òò´ËÒªÇ󴫶¯Öá¹ÜÓø־ßÓÐÁ¼ºÃµÄº¸½ÓÐÔÄܺ͸ߵijߴ羫¶È¡£
Automobile transmission shaft tube steel is mainly used to make automobile drive shaft tube. As the main function of the transmission shaft tube is to support revolving body and transmit power, the material should be provided with: sufficient strength, stiffness and a certain degree of toughness as well as higher fatigue strength, that is, the raw materials should be provided with good comprehensive mechanical properties. The longitudinal welding technology is generally used to manufacture the automobile transmission shaft tube, and the dimension control process is based on the method of controlling the inner diameter by controlling the outer diameter; Therefore, the steel for the shaft tube of the transmission shaft should be provided with good welding performance and high dimensional precision.
Åƺźͱê×¼
Åƺţº 440QZ¡¢ 480QZ¡¢ 700QZ
Grade: 440QZ, 480QZ, 700QZ
Ö´Ðбê×¼£º JGX658-2010 ¡¶ 440QZ¡¢ 480QZ ÈÈÔþ¸Ö´ø¼¼ÊõÐÒé¡·
Applicable standard: JGX658-2010: 440QZ, 480QZ Technical Agreement for Hot Rolled Steel Strip
²úÆ·¹æ¸ñ
1.2¡«25.4¡Á830¡«1900mm
kuÓÎ×îеØÖ·:ʯÓÍÌìÈ»ÆøÊäË͹ÜÓÃÈÈÁ¬Ôþ¸Ö´ø
Hot continuous rolling steel strip for petroleum a
Ö÷ÒªÓÃ;
ʯÓÍÌìÈ»ÆøÊäË͹ÜÓÃÈÈÁ¬Ôþ¸Ö´ø¾ßÓнϸߵÄÇ¿¶È¡¢¸ßµÄËÜÈÍÐÔ£¬µÍµÄÈÍ´àÐÔת±äζȣ¬Á¼ºÃµÄº¸½ÓÐÔÄÜÒÔ¼°ÓÅÁ¼µÄ¿¹ÇâÖ¿ªÁÑºÍ Áò»¯ÎïÓ¦Á¦¸¯Ê´¿ªÁÑÐÔÄÜ£¬Ö÷ÒªÓÃÓÚÖÆÔìÊäËÍʯÓÍ¡¢ÌìÈ»Æø¡¢Ë®Ãº½¬µÈ½éÖʵĹܵÀ¡£
The hot continuous rolling steel strip for petroleum and gas transportation pipeline is provided with high strength, high plasticity, low ductile brittle transition temperature,good weldability, good welding performance as well as excellent anti-HIC and sulfide stress corrosion cracking properties, which is mainly used in manufacture of?pipelines for transporting petroleum, natural gas, coal-water slurry and other media.
Åƺźͱê×¼
Ö´Ðбê×¼£º GB/T14164-2013 ¡¶Ê¯ÓÍÌìÈ»ÆøÊäË͹ÜÓÃÈÈÔþ¿í¸Ö´ø¡·API Spec 5L ¡¶¹ÜÏ߸ֹܡ· ? GB/T9711.2-1999¡¶Ê¯ÓÍÌìÈ»Æø¹¤ÒµÊäË͸ֹܽ»»õ¼¼ÊõÌõ¼þ¡·
GB/T14164-2013: Hot Rolled Wide Steel Strip for Transportation Pipeline of Oil and Gas Pipelines;
API Spec 5L: Steel Pipe for Pipeline ; ??GB/T9711.2-1999: Technical Specification for Delivery of Transportation Steel Pipe for Petroleum and Natural Gas?Industry
²úÆ·¹æ¸ñ
4.0~25.4¡Á830~1900mm
kuÓÎ×îеØÖ·:Ó;®Ì×¹ÜÓÃÈÈÁ¬Ôþ¸Ö´ø
Hot continuous rolling steel strip for petroleum w
Ö÷ÒªÓÃ;
Ö÷Òª×÷Ϊº¸½ÓÓ;®Ì׹ܵÄÔ²ÄÁÏ£¬¹«Ë¾Ó;®Ì×¹ÜÓÃÈÈÔþ¸Ö´ø¾ßÓгߴ羫¶È¸ß£¬º¸½ÓÐÔÄܼѡ¢×÷³Éº¸¹ÜÔÚµØÏ·þÒÛʱ¿¹¼·»Ù¡¢¿¹Ñ¹ À£ÄÜÁ¦Ç¿µÄÌص㡣
Mainly used as the raw material for welded petroleum well casing; SISG¡¯s hot-rolled steel strip for petroleum well casing is characterized by high dimensional precision, good welding performance, and resistance to collapse and resistance to crushing when serving as welded pipe underground.
Åƺźͱê×¼
Ö´Ðбê×¼£º¹«Ë¾¼¼ÊõÐÒé¼° API Spec 5CT
Applicable standard: SISG¡¯s technical agreement and API Spec 5CT
²úÆ·¹æ¸ñ
3.5¡«25.4¡Á830¡«1900mm
kuÓÎ×îеØÖ·:µÍÂÁ¡¢µÍ̼¡¢µÍ¹è¸´ºÏ²ÄÁÏÓÃÈÈÔþ¸Ö´ø
Hot rolled steel strip for low aluminum, low carbo
Ö÷ÒªÓÃ;
Ö÷ÒªÓÃ×÷¸ÖÂÁ¸´ºÏ°å»ùÁÏ¡£¸ÖÂÁ¸´ºÏ²ÄÁϽáºÏÁ˸ֵĸßÇ¿¶È¡¢Ò×ÇåÏ´ºÍÂÁµÄÖÊÇá¡¢¼ÛÁ®¡¢ ÓÅÁ¼µÄµ¼µç¡¢µ¼ÈÈÐÔµÈÓŵ㣬ÔÚº½¿Õ¡¢»úе¡¢»¯¹¤¡¢Ò½ÁÆ¡¢Æû³µ¡¢µçÁ¦µÈ¶à·½ÃæÁìÓòµÃµ½Á˹㷺ӦÓá£
The hot-rolled steel strip for low aluminum, low carbon and low silicon composite materials is mainly used as base material for steel-aluminum composite plate. Steel aluminum composite has been widely used in many fields, such as aviation, machinery, chemical engineering, medical treatment, automobile, electric power and so on, thanks to its high strength, easy cleaning, light weight, low price, excellent electrical conductivity and thermal conductivity.
Åƺźͱê×¼
Åƺţº YBFe¡¢ SRG¡¢ DK50¡¢ DC01-LY
Ö´Ðбê×¼£º¼¼ÊõÐÒé
Grade: YBFe, SRG, DK50, DC01-LY
Applicable standard: Technical agreement
²úÆ·¹æ¸ñ
2.0~6.0¡Á900~1550mm
kuÓÎ×îеØÖ·:¼¯×°ÏäÓÃÈÈÔþ¸Ö´ø
Hot rolled steel strip for containers
Ö÷ÒªÓÃ;
¼¯×°ÏäÓø־ßÓнϸߵÄÄÍ´óÆø¸¯Ê´ÐÔÄÜ£¬ÓÃÓÚ¼¯×°ÏäÍâ°å¡¢½á¹¹¼þµÈµÄÖÆÔì¡£¹«Ë¾¿ª·¢µÄ¼¯×°Ïä¸Ö²ÉÓõÍ̼¸ÖÖи´ºÏÌí¼Ó Cu¡¢ P¡¢ Cr¡¢ Ni µÄºÏÀí³É·ÖÉè¼Æ£¬¸Ö²ÄÄ͸¯Ê´ÐÔÓÅÒ죬¶øÇҳߴ羫¶È¡¢°åÐÍ¡¢±íÃæÖÊÁ¿¡¢³ÉÐÍÐÔÖ¸±êÁ¼ºÃ£¬½ÏºÃµØÂú×ãÁ˼¯×°ÏäÓøֵÄʹÓà ҪÇó¡£
The steel for containers is provided with high atmospheric corrosion resistance, suitable for use in manufacture of container shell plate, structural parts and so on. The container steel developed by SISG is based on the design with reasonable composition of Cu, P, Cr and Ni added in the low carbon steel, with excellent corrosion resistance and precise dimension as well as good plate shape, surface quality and formability index, which can well meet the requirements for the container steel.
Åƺźͱê×¼
Åƺţº SPA£H
Grade: SPA - H
Ö´Ðбê×¼£º JIS G3125 ¡¶¸ßÄÍ´óÆø¸¯Ê´ÔþÖƸְ塷
Applicable standard: JIS G3125: High Atmospheric Corrosion Resistant Rolled Steel Plate
²úÆ·¹æ¸ñ
2.5¡«6.0¡Á900¡«1350mm
kuÓÎ×îеØÖ·:Ö÷Òª²úÆ·The main productsÓÊÏ䣺5µç»°£º0531-67606362
kuÓÎ×îеØÖ·:ɽ¸Ö³ö¿ÚµÄ¸Ö½î²úÆ·
SISG¡¯s steel products for export
Ö÷ÒªÓÃ;
Åƺźͱê×¼
|
No. |
Supply grade |
Standard |
Specification mm |
Delivery status |
Application field |
|
1 |
British standard 460 (B) |
BS4449 |
¦µ10-¦µ50 |
Hot rolled |
Export, Foreign engineering construction |
|
2 |
British standard B500B |
BS4449 |
¦µ10-¦µ50 |
Hot rolled |
|
|
3 |
Japanese standard SD295A |
JISG3112 |
D10-D51 |
Hot rolled |
|
|
4 |
Australian standard 500N |
AS/NZS4671 |
¦µ12-¦µ36 |
Hot rolling/Controlled rolling |
|
|
5 |
Korean standard SD400 |
KS D 3504 |
D10-D5 |
Hot rolled |
|
|
6 |
Japanese standard SD390 |
JISG3112 |
D10-D51 |
Hot rolled |
|
|
7 |
Japanese standard SD390 |
ASTM A615-A615M |
3#-18# |
Hot rolled |
|
|
8 |
Malaysia |
MS146 |
According to user's requirement |
According to user's requirement |
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:ÆÕͨ½¨ÖþÓÃÈÈÔþ¸Ö½î
HOT ROLLED REINFORCING BARS FOR ORDINARY BUILDING
Ö÷ÒªÓÃ;
Åƺźͱê×¼
|
ÐòºÅ |
Ãû³Æ |
ÅƺŠ|
¹æ¸ñ mm |
Ö´Ðбê×¼ |
ÓÃ; |
|
1 |
ÈÈÔþ´øÀ߸ֽîÅÌÌõ |
HRB400/HRB400E/HRB500/HRB500E |
¦µ6-¦µ10 |
GB1499.2 |
½¨ÖþÓÃ¸Ö |
|
2 |
ÈÈÔþ¹âÔ²¸Ö½îÅÌÌõ |
HPB235/HPB300 |
¦µ6-¦µ22 |
GB1499.1 |
½¨ÖþÓÃ¸Ö |
|
3 |
¸Ö½î»ìÄýÍÁÓÃÈÈÔþ´øÀ߸ֽî |
HEB335/HRB400/HRB500/HHB335E/HRB400E/HRB500E/HRB600 |
¦µ10-¦µ50 |
GB1499.2 |
½¨ÖþÓÃ¸Ö |
No.
Name
Grade
Specification
mm
Applicable
standard
Purpose
1
Hot rolled ribbed steel bar wire roll
HRB400/HRB400E/HRB500/HRB500E
¦µ6-¦µ10
GB1499.2
Steel for building
2
Hot rolled plain round steel bar roll
HPB235/HPB300
¦µ6-¦µ22
GB1499.1
Steel for building
3
Hot rolled ribbed steel bar for
reinforced concrete
HEB335/HRB400/HRB500/ HHB335E/HRB400E/HRB500E/
HRB600
¦µ10-¦µ50
GB1499.2
Steel for building
²úÆ·¹æ¸ñ
kuÓÎ×îеØÖ·:ÌØÊâÓÃ;°ô²Ä
Bar materials for special purpose
Ö÷ÒªÓÃ;
Åƺźͱê×¼
|
No. |
Steel grade |
Steel grade |
Specification mm |
Applicable standard |
Purpose |
|
1 |
Anti-seismic Reinforceing steel bar |
HRB335E/HRB400E/HRB500 |
¦µ10-¦µ50 |
GB1499.2 |
Applied to seismic prone areas and building with high requirements or super high-rise buildings with special use requirements, large-span bridges, airports, nuclear power plants, tunnels, water conservancy projects and other fields. |
|
2 |
Finish rolling thread steel |
PSB785/PSB 830/HRB500JZ |
¦µ25, ¦µ32 |
GB/T20065 |
Used in continuous beam and large frame structure in super large building, large water conservancy project, industrial and civil buildings, and highway and railway large and medium span bridges, nuclear power plant, ground anchors and other projects. |
|
3 |
Hot rolled Round steel |
20MnSi |
¦µ14-¦µ60 |
¦µ14-¦µ60 |
Used in manufacture of chains |
|
4 |
Anchor rod Reinforceing steel bar |
MG335 |
¦µ18-¦µ22 |
LGJX16-2011 |
Mainly used in coal mine roadway support, and also suitable for use in highway tunnel support and side rock protection. |
|
MG400 |
|||||
|
MG500 |
LGJX12-2011 |
||||
|
Full-strength anchor rod |
LGJX14-2011 |
||||
|
Right-screw anchor rod |
¦µ16-¦µ22 |
LGJX02-2010 |
|||
|
CRM600 |
¦µ22 |
||||
|
CRM600 |
¦µ220, ¦µ22 |
LGJX49-2010 |
|||
|
5 |
Resin anchor Rod steel bar |
MG335-MG600 |
Full sizes |
Full series |
²úÆ·¹æ¸ñ
-
kuÓÎ×îеØÖ·:¹ØÓÚɽ¸Ö
- ¼¯Íżò½é
- ×éÖ¯¼Ü¹¹
- ɽ¸ÖÎÄ»¯
- ×Ó¹«Ë¾¼ò½é
-
kuÓÎ×îеØÖ·:ýÌåÖÐÐÄ
- ͼÎÄÐÂÎÅ
- ÊÓƵÐÂÎÅ
- ÐÂýÌå
- ýÌ忴ɽ¸Ö
-
kuÓÎ×îеØÖ·:ÉÏÊй«Ë¾
- ɽ¶«¸ÖÌú(600022.SH)
- ½ðÁë¿óÒµ(000655.SZ)
-
kuÓÎ×îеØÖ·:Ö°¹¤·¢Õ¹
- ²©Ê¿ºó¹¤×÷Õ¾
- È˲ÅÕÐƸ
-
kuÓÎ×îеØÖ·:ÁªÏµÎÒÃÇ
- ÁªÏµ·½Ê½
- ×Ó¹«Ë¾µ¼º½
³¹«Íø°²±¸ 37010102000509ºÅ